News information
13301865986
Service hotline
News information
What problems should be paid attention to during the manufacturing and installation of photovoltaic brackets?
Abstract：Photovoltaic bracket is an important part of photovoltaic system, and the precautions in the manufacturing and installation process directly affect the performance and service life of the entire photovoltaic system. The following will be from the manufacturing and installation of two aspects, analyze the problems that need to pay attention to photovoltaic support.
Photovoltaic bracket is an important part of photovoltaic system, and the precautions in the manufacturing and installation process directly affect the performance and service life of the entire photovoltaic system. The following will be from the manufacturing and installation of two aspects, analyze the problems that need to pay attention to photovoltaic support.
First, the manufacturing precautions of photovoltaic bracket
Strictly comply with design drawings and requirements
When manufacturing photovoltaic brackets, it is necessary to lofting according to design drawings and requirements to ensure that the bracket structure is reasonable and the lines are smooth. At the same time, it is necessary to fully understand the design intent, strictly comply with the design requirements, and ensure that the size and shape of the bracket meet the design standards.
Welding quality is the key
When welding, pay attention to ensure that the weld is full and smooth to avoid problems such as virtual welding and missing welding. After the welding is completed, the quality check should be carried out to ensure that the welding is firm and the structure is stable. At the same time, it is necessary to pay attention to the safety problems during welding, and take appropriate welding processes and protective measures to avoid accidents during welding.
Quality control of parts
In the manufacturing process of photovoltaic brackets, all components need to be carefully checked to ensure that their quality meets the requirements. Avoid component damage due to collision and other reasons during installation, which will affect the performance of the entire photovoltaic system. At the same time, parts need to be properly preserved to avoid quality changes caused by environmental impacts.
Second, the installation of photovoltaic bracket precautions
Accurate positioning and firm installation
When installing the photovoltaic bracket, ensure that its positioning is accurate and install it in strict accordance with the design drawings. At the same time, it is necessary to ensure that the support is firmly installed and can withstand the test of natural disasters such as wind and rain. During the installation process, it is also necessary to pay attention to the protection of the surrounding environment and facilities to avoid damage or pollution.
Safe construction, pay attention to protection
During the installation process, you must comply with the safety construction regulations to ensure safe operation. Installation personnel must take necessary safety training to understand and master related safety knowledge and operation skills. At the same time, during the installation process, attention should be paid to protecting vulnerable parts such as photovoltaic panels and supports, and appropriate protective measures should be taken to avoid damage.
Check and accept, ensure quality
After the installation of the photovoltaic bracket, it is necessary to carefully check to ensure that the connection and fixing of the components are in good condition. During the inspection, pay attention to the connection between the support and the ground, the support and the photovoltaic panel, and check whether there is loosening or falling off. At the same time, it is necessary to check the flatness and verticality of the bracket to ensure that it meets the design requirements. In the inspection and acceptance process, it is necessary to test and measure in accordance with relevant standards and specifications to ensure that the quality of the photovoltaic bracket meets the requirements.
Maintenance, timely update
In the process of use, the photovoltaic bracket needs to be maintained and regularly checked its structural condition and connection parts. If there is damage or aging problem, it should be updated or repaired in time. At the same time, it is necessary to regularly clean the dust and dirt on the surface of the bracket to keep its heat dissipation effect and appearance clean. In the process of maintenance, it is necessary to protect the surrounding environment and facilities to avoid damage or pollution to the surrounding environment.
In short, the manufacturing and installation of photovoltaic brackets is an important part of the construction of photovoltaic systems, and must be operated in strict compliance with relevant standards and specifications. At the same time, it is necessary to pay attention to the quality, safety and other issues in the control of manufacturing and installation process to ensure the structural stability and service life of the photovoltaic bracket. By continuously optimizing the manufacturing and installation process and improving the performance and economy of photovoltaic brackets, it can make a positive contribution to the sustainable development of the photovoltaic industry.
First, the manufacturing precautions of photovoltaic bracket
Strictly comply with design drawings and requirements
When manufacturing photovoltaic brackets, it is necessary to lofting according to design drawings and requirements to ensure that the bracket structure is reasonable and the lines are smooth. At the same time, it is necessary to fully understand the design intent, strictly comply with the design requirements, and ensure that the size and shape of the bracket meet the design standards.
Welding quality is the key
When welding, pay attention to ensure that the weld is full and smooth to avoid problems such as virtual welding and missing welding. After the welding is completed, the quality check should be carried out to ensure that the welding is firm and the structure is stable. At the same time, it is necessary to pay attention to the safety problems during welding, and take appropriate welding processes and protective measures to avoid accidents during welding.
Quality control of parts
In the manufacturing process of photovoltaic brackets, all components need to be carefully checked to ensure that their quality meets the requirements. Avoid component damage due to collision and other reasons during installation, which will affect the performance of the entire photovoltaic system. At the same time, parts need to be properly preserved to avoid quality changes caused by environmental impacts.
Second, the installation of photovoltaic bracket precautions
Accurate positioning and firm installation
When installing the photovoltaic bracket, ensure that its positioning is accurate and install it in strict accordance with the design drawings. At the same time, it is necessary to ensure that the support is firmly installed and can withstand the test of natural disasters such as wind and rain. During the installation process, it is also necessary to pay attention to the protection of the surrounding environment and facilities to avoid damage or pollution.
Safe construction, pay attention to protection
During the installation process, you must comply with the safety construction regulations to ensure safe operation. Installation personnel must take necessary safety training to understand and master related safety knowledge and operation skills. At the same time, during the installation process, attention should be paid to protecting vulnerable parts such as photovoltaic panels and supports, and appropriate protective measures should be taken to avoid damage.
Check and accept, ensure quality
After the installation of the photovoltaic bracket, it is necessary to carefully check to ensure that the connection and fixing of the components are in good condition. During the inspection, pay attention to the connection between the support and the ground, the support and the photovoltaic panel, and check whether there is loosening or falling off. At the same time, it is necessary to check the flatness and verticality of the bracket to ensure that it meets the design requirements. In the inspection and acceptance process, it is necessary to test and measure in accordance with relevant standards and specifications to ensure that the quality of the photovoltaic bracket meets the requirements.
Maintenance, timely update
In the process of use, the photovoltaic bracket needs to be maintained and regularly checked its structural condition and connection parts. If there is damage or aging problem, it should be updated or repaired in time. At the same time, it is necessary to regularly clean the dust and dirt on the surface of the bracket to keep its heat dissipation effect and appearance clean. In the process of maintenance, it is necessary to protect the surrounding environment and facilities to avoid damage or pollution to the surrounding environment.
In short, the manufacturing and installation of photovoltaic brackets is an important part of the construction of photovoltaic systems, and must be operated in strict compliance with relevant standards and specifications. At the same time, it is necessary to pay attention to the quality, safety and other issues in the control of manufacturing and installation process to ensure the structural stability and service life of the photovoltaic bracket. By continuously optimizing the manufacturing and installation process and improving the performance and economy of photovoltaic brackets, it can make a positive contribution to the sustainable development of the photovoltaic industry.
Add company wechat